AmolV

8
Solutions
0
Forum Threads
0
Blog Entries
0
Articles
0
Downloads
0
Ideas
0
Events
0
Videos
0
Groups Joined
126
Comments
AmolV
Member for 2 years 4 weeks

Send this user an email
Show:
AmolV commented 8 hours 23 min ago on the SuSE Linux Enterprise - Baremetal forum discussion You could try contacting your account rep. or support and check about the availability time lines for ...
AmolV commented 1 week 3 days ago on the BMR support for blade servers? forum discussion 1. Blade Servers are supported. Yes, there are some issues seen, but Symantec Support will help you ...
AmolV commented 2 weeks 4 days ago on the Unable to take backup on an nfs mounted share point forum discussion Turn off BMR form the policy if you dont need BMR. If you do need BMR, then configure the BMR master ...
AmolV commented 2 weeks 5 days ago on the Could not initialize configuration, Error Code = 1 forum discussion Not sure about the error you are getting, is this a self restore or a DSR? But about the other ...
AmolV commented 2 weeks 6 days ago on the Point in Time Bare Metal Restore Problem forum discussion When you enable BMR on a policy, TIR also gets enabled since BMR depends on TIR to give you a ...
AmolV commented 2 weeks 6 days ago on the bmrsrtadm: failure to create CD image for solaris 8 forum discussion if you have turned off volfs, try giving the device path, like /dev/dsk/<cd-rom-device-name ...
AmolV commented 2 weeks 6 days ago on the BMR is it good enough ? forum discussion >>How difficult will its be to capture a server via BMR whereby that server is a media server ...
AmolV commented 2 weeks 6 days ago on the BMR Restore ok, but OS fail to boot forum discussion You might want to check the bmrrst log on the master server to see if there were any ...
AmolV commented 8 weeks 3 days ago on the BMR backup failed forum discussion Platform? NBU version? Is tpsbcd your client where you are trying to take a BMR backup? If yes then ...
AmolV commented 8 weeks 3 days ago on the BMR for only system drive forum discussion 1. Select ALL_LOCAL_DRIVES in the backup-selection but then have an exclude list for the BMR policy ...