Uncle_Bob

Profile

Uncle_Bob
Member for: 5 years 18 weeks
Contact: Send this user an email

Member for: 5 years 18 weeks

Blog: View recent blog entries

Contribution Stats

Solutions

Forum Threads

Comments

Blog Entries

Ideas

Articles

Videos

Downloads

Events

Groups Joined

Uncle_Bob's Activity

Show:

discussion comment 23 Nov 2010

Uncle_Bob commented on: Routing traffic over backup lan to Datadomain appliance

Max Thanks for the update, I have configured configured exactly as you have stated and created a storage server using a separate IP and Hostname from that to the public network interface combined with an host file entry on the data ...

New forum discussion 16 Nov 2010

Uncle_Bob posted: Routing traffic over backup lan to Datadomain appliance

I need a solution I would like to know if anyone has managed to configure Netbackup to route backups to a Datadomain appliance using a dedicated backup VLAN. I am trying to get a client to backup to a media server which has the

discussion comment 07 Jul 2010

Uncle_Bob commented on: Backing up Exchange to tape using VIP cluster name

We are running Windows 2003 Master running Netbackup 6.5.5 and the same on the exchange servers.

New forum discussion 07 Jul 2010

Uncle_Bob posted: Backing up Exchange to tape using VIP cluster name

I need a solution Does anyone know if it is possible to backup the active server node which is partcipating in a CCR cluster to tape. My setup consists of server1 at site1 and server2 at site 2. Each site has it own tape fibre c

discussion comment 24 Nov 2009

Uncle_Bob commented on: Strange Issue with Hardware not been detected by Netbackup

Fixed by applying 6.5.2A update patch, issue was down to Master and Media running on 6.5.

discussion comment 23 Nov 2009

Uncle_Bob commented on: Strange Issue with Hardware not been detected by Netbackup

Marianne Thankyou for your response, but I am in touch with support since I have gone through all the actions mentioned by both Stuart and yourself and had no luck. Netbackup does work with Windows 2008 R2 64bit perfectly well and ...

discussion comment 23 Nov 2009

Uncle_Bob commented on: Strange Issue with Hardware not been detected by Netbackup

Stuart Thankyou for taking the the time to respond to my message. The Master server is running on Windows 2003 Enterprise 32bit. I have checked the properties in Device Manager and everything shows correctly. Windows 2008 SP1 64bit ...

New forum discussion 22 Nov 2009

Uncle_Bob posted: Strange Issue with Hardware not been detected by Netbackup

I need a solution I am having problems getting Netbackup 6.5.2 master to see hardware devices on a new media server, basically I am getting 'no devices found' when running the device configuration wizard. The media

discussion comment 22 Nov 2009

Uncle_Bob commented on: Problem in tape drive detection

n/a

New forum discussion 13 Aug 2008

Uncle_Bob posted: bparchive command for Netbackup 6.0MP4 Windows

I need a solution Does anyone know if it is possible to use the NEW_STREAM directive with the listfile option switch when using the bparchive command. install_path\NetBackup\bin\bparchive [-p policy ] [-s sc

discussion comment 21 Sep 2007

Bharat Mistry 2 commented on: Drives going into AVR mode after zoning changes on SAN

Randy, I have checked the 'Target Reset' option on the Qlogic HBA and currently it is enabled and I think this will the case across the board on all the servers within our Netbackup SSO Environment. When you say you had a lot of problems ...

discussion comment 21 Sep 2007

Bharat Mistry 2 commented on: Drives going into AVR mode after zoning changes on SAN

Philip Thanks for the information, I have already got this set on the master and media servers and doubled checked, if the value isn't specified then a default is set by Netbackup which seems to be 5. You can check this by going to C:\Program ...

New forum discussion 20 Sep 2007

Uncle_Bob posted: Drives going into AVR mode after zoning changes on SAN

I need a solution I am wondering if anyone else has experienced problems with drives going down and showing as AVR mode after changes to zoning on the SAN. We have EMC CX500 SAN and the Netbackup environment consists of 1 maste

discussion comment 25 Feb 2007

Bharat Mistry 2 commented on: VSS + System volume Information folder Cache file problem

Hi RakeshThese file are not recognised by windows as shadow copies since they have been created by Netabckup and you cannot delete them in the conventional way as described in the tech note or by issuing by command line using vssadmin delete ...

New forum discussion 23 Feb 2007

Uncle_Bob posted: VSS + System volume Information folder Cache file problem

I need a solution I have noticed that on a number of clients running WIN2K3 SP1 that are being backed up using VSS, there are files being created in the hidden folder called 'system volume information' on the drive bei

discussion comment 31 Oct 2006

Bharat Mistry 2 commented on: Netbackup 6.0 in mixed environment

Yes, two of the media servers are SAN media servers and 2 are standard media servers with access to two ML6020 libaries and two Dell PV136T's.

New forum discussion 31 Oct 2006

Uncle_Bob posted: Netbackup 6.0 in mixed environment

I need a solution We have an Redhat Linux Enterprise 3.0 as a master server and 4 media servers running on win2k3 Enterprise in a SAN attached environment.. Has anyone experienced stability issues with the setup or problems with

discussion comment 31 Oct 2006

Bharat Mistry 2 commented on: It must be Halloween

Thats weird because I have just had the same problem with netbackup 6.0 showing AVR against two drives out of eight instead of TLD. Stopping and starting services has no effect. Backups attempt to write to the drive and attemots are made to mount ...

discussion comment 30 Oct 2006

Bharat Mistry 2 commented on: Cleaning Media on ML6020 libraries

This is what I am trying to do by deleting any cleaning slots that have been defined on the library. This in turn disables the autoclean feature. When an inventory is run on the library it just will not see this cleaning media in the mailbox ...

New forum discussion 30 Oct 2006

Uncle_Bob posted: Network Connection Broken

I need a solution Has anyone had problems with SQL Agent backup completing the backup of all the individual databases in full as defined in the .bch script but failing on the parent job with status code 40 'Network Connectio

Uncle_Bob

Uncle_Bob's Activity

Technical Support

Symantec.com

Store

Community Stats