g_lee

4
Solutions
0
Forum Threads
0
Blog Entries
0
Articles
0
Downloads
0
Ideas
0
Events
0
Videos
0
Groups Joined
33
Comments
Send this user an email
Show:
g_lee
commented 7 hours 7 min ago on the dmpfs /dev/vx/dmp forum discussion VxVM 4.0 onwards introduced DMP filesystem (dmpfs) - this is used for the dmp metanodes/metadevices ...
g_lee
commented 8 hours 52 min ago on the Device being used by VxVM forum discussion sunguru,
Per the Sunsolve document, that procedure is only applicable to Solaris 8 and 9, so ...
g_lee
commented 3 days 1 hour ago on the Device being used by VxVM forum discussion as cfgadm -c configure is complaining, it sounds as though it's more a hardware/Solaris issue than ...
g_lee
commented 3 days 7 hours ago on the import failed: Disk group has no valid configuration copies forum discussion to move detached plexes to another disk group you need the dg split/join license feature as Gaurav ...
g_lee
commented 4 days 1 hour ago on the import failed: Disk group has no valid configuration copies forum discussion There are various possibilities for why the cbr information could be out of date, eg: the ...
g_lee
commented 3 weeks 6 days ago on the Can't resize VxFS -- fsadm: ERROR: V-3-20013: unrecognized vxfs version number forum discussion The error you're getting from vxresize is that it cannot run fsadm as it can't recognise the version ...
g_lee
commented 4 weeks 5 days ago on the Heartbeat low priority link forum discussion sunguru,
As bge0 is a public interface, you would want this to be a low-pri link (in Sandeep's ...
g_lee
commented 6 weeks 8 hours ago on the ORACLE ERP Disaster Recovery - forum discussion sfdoccentral tends to be a good place to start: http://sfdoccentral.symantec.com/
Refer to the ...
g_lee
commented 6 weeks 3 days ago on the Veritas Cluster - Steps for a beginner.. forum discussion Glad to have helped you :)
As you mentioned you're unfamiliar / new to the product, would strongly ...
g_lee
commented 6 weeks 3 days ago on the Veritas Cluster - Steps for a beginner.. forum discussion If you want the volume to be active-active (ie: to access the volume from both/more than one machine ...