Luman

I need a solution So now that Windows 7 has reached RTM, the WAIK is final, RSAT's available, etc. I got to thinking, is it possible to upgrade the WinPE files that Ghost has installed to version 3.0? The drivers should be a

discussion comment 30 Aug 2009

Luman commented on: Change default Ghost32 settings for all users?

Turns out, after a bit of reading, it looks like if an image is being created via task over a network spans must be created because Ghost32 on the client side doesn't know if the target destination is capable of files larger than 2GB. So, ...

New forum discussion 30 Aug 2009

Luman posted: Change default Ghost32 settings for all users?

I need a solution Is it possible to change the default settings in Ghost32 for all users, including the settings stored in the WinPE & WinPE-512 virtual partitions? The reason why I ask is because two days ago an image sp

discussion comment 30 Aug 2009

Luman commented on: Windows 7 RTM: Clone + Configuration Task Fails

Still having this problem, no end in sight. I'd really appreciate a response since I don't know what else to do at this point besides have two separate tasks. Separate clone & configure tasks work, but it's kind of a patch job. Is there an ...

discussion comment 26 Aug 2009

Luman commented on: Windows 7 RTM: Clone + Configuration Task Fails

The thing is, Vista's kernel is 6.0, Windows 7 is 6.1. 99% of the Vista drivers out there I've seen & tested work with 7 as well, as do applications. Obviously there's something different, I'm certainly not dismissing what you're saying, ...

discussion comment 25 Aug 2009

Luman commented on: GSS2/Vista/Sysprep/3rd party drivers

For Vista, Windows 7, Server 2008, and Server 2008 R2, sysprep as a whole is completely different. Adding drivers involves one of a few methods. Get to know the Windows System Image Manager from the WAIK. The WAIK for Windows 7 & ...

discussion comment 17 Aug 2009

Luman commented on: Optiplex 960 Problems

I would add both the NIC drivers & the S-ATA AHCI drivers to WinPE either from Dell or from Intel if you haven't already (I know you mentioned adding the NIC drivers). That solved 99% of my problems when dealing with these newer ...

discussion comment 17 Aug 2009

Luman commented on: Windows 7 RTM: Clone + Configuration Task Fails

A slight update and clarification to this as well. I've tested this on a number of systems, including a Sony Vaio VGN-P598E, a Dell Optiplex 745, 755, 760, and a Latitude E6400. In cases where the system requires the proper AHCI / S-ATA drivers ...

New forum discussion 17 Aug 2009

Luman posted: Windows 7 RTM: Clone + Configuration Task Fails

I need a solution I finished our first build of Windows 7 RTM and tried cloning an image back to a machine this morning with the same limited success as I’ve had with the RC. Of note, I didn’t have these problems with the beta. W

discussion comment 15 Aug 2009

Luman commented on: GSS2/Vista/Sysprep/3rd party drivers

I still use that utility on our XP builds, however Vista, Windows 7, Server 2008 & Server 2008 R2 change the way drivers are searched for. The whole reason for spdrvscn is so INF files can be recursively added to the registry; XP just doesn't ...

New forum discussion 18 Apr 2009

Luman posted: What version of WinPE does GSS 2.5 use, 2.0 or 2.1?

I need a solution I'm wondering what version of WinPE GSS 2.5 uses. Is it 2.0 or 2.1? I did a full install of GSS 2.5 as soon as it became available. I see multiple discussions talking about WinPE 2.0, some are about 2.1. If

discussion comment 09 Jan 2009

Luman commented on: GSS Compatibility with Server 2008 Domain Controllers

So no official response on this yet? It's a fairly simple question.

New forum discussion 08 Jan 2009

Luman posted: GSS Compatibility with Server 2008 Domain Controllers

I need a solution I'd like to know when Symantec will make GSS & XP clients compatible with networks that have a Server 2008 Domain Controller. Specifically, when GSS will be able to successfully join a XP client to the

discussion comment 10 Oct 2008

Luman commented on: Is there a way to get around Ghost's OOBE sysprep switch in Vista?

I have drivers lined up for Optiplex GX280's, GX620's, 745's, 755's, Latitude D630's and M1330's. I'm working on getting drivers in place for Bootcamp - i.e. all of Apple's Macs, sans the XServe. I cannot stress how much different Vista's sysprep ...

discussion comment 09 Oct 2008

Luman commented on: Is there a way to get around Ghost's OOBE sysprep switch in Vista?

https://forums.symantec.com/syment/board/message?board.id=109&message.id=4054 try that.

New forum discussion 08 Oct 2008

Luman posted: Is there a way to get around Ghost's OOBE sysprep switch in Vista?

I need a solution I'm creating a new Vista image that I'd like to run sysprep on via a Ghost task. I have a fairly meaty, good working xml file & a large number of drivers for a few Dell models. Currently I update t

New forum discussion 03 Oct 2008

Luman posted: Server with Dual NIC's

I need a solution I'm running a Windows Server 2003 box with dual gigabit NIC's. They're on different busses so I can't create a link aggregate, but what I'd like to do instead is to route all the traffic

Luman

Luman's Activity

Technical Support

Symantec.com

Store

Community Stats