截屏视频帮助

Block the iphone not charging

创建时间: 26 10 月 2013 • Updated: 16 11 月 2013 | 4 条评论
此问题已解决。 请查看解决方案。

I found the storage of iphone is running. I tried to block and add device id in hardware but after block the charging not work. Need assistance to enable charging.

讨论 归类至以下社区:

评论 条评论跳转至最新评论

.Brian 的图片

https://www-secure.symantec.com/connect/forums/blo...

Please click the "Mark as solution" link at bottom left on the post that best answers your question. This will benefit admins looking for a solution to the same problem.

raju123 的图片

Not be possible without enable storage

Check Mithun Comment

https://www-secure.symantec.com/connect/forums/iphone-charge-and-device-control

When an USB IPhone Connector is connected to USB port of Computer, IPhone installs the Drivers of the same (or ITune Software identifies the Iphone). Until and unless the Drivers can installed or detection takes place the Phone would not be charged. IPhone also carries the HDD within it. So, when you insert the Connector, it detects the HDD as well. (you can see the Iphone HDD in the My Computer option)

However, you need to understand, it would not get charged until the IPhone is detected. And for detection your HDD has to be activated and drivers be installed and a Transfer has to take place (which you do not want.)

Mick2009 的图片

Hi aakash_bhalla,

Unfortunately, it is not possible to block rthe iPhone without also disabling charging.  Some additional information:

How to block or allow device's in Symantec Endpoint Protection
https://www-secure.symantec.com/connect/articles/how-block-or-allow-devices-symantec-endpoint-protection

 

With thanks and best regards,

Mick