1. /
  2. Security Response/
  3. Adware.180Search

Adware.180Search - Removal

Updated:
February 13, 2007 11:37:46 AM
Type:
Adware
Publisher:
180Solutions
Risk Impact:
Medium
File Names:
Msbb.exe Boomerang.exe 180SAInstaller.dll setup4156.exe sac.exe sau.exe 1802.dll salmbundle
Systems Affected:
Windows 2000, Windows 95, Windows 98, Windows Me, Windows NT, Windows Server 2003, Windows XP

Note: Removing this adware component from the system will likely cause the program that installed it to not function as intended. The uninstaller generally identifies the programs that will not work after uninstallation.

Removal Tool
Symantec Security Response has developed a removal tool for Adware.180Search. Use this removal tool first, as it is the easiest way to remove this threat.

The tool can be found here: http://securityresponse.symantec.com/avcenter/Fix180Sh.exe

The current version of the tool is 1.0.5 and will have a digital signature timestamp equivalent to 02/14/2005 3:31PM PST.

Note:
The date and time displayed will be adjusted to your time zone, if your computer is not set to the Pacific time zone.

It has been reported that a computer with Adware.180Search on it may also have other security risks installed. Symantec recommends that the following steps be carried out:
    1. Apply the Adware.180Search Removal Tool.
    2. Update the definitions by starting the Symantec program and running LiveUpdate.
    3. Run a full system scan to detect any other security risks on the computer.
    4. If the scan detects any further security risks, check for removal tools at http://securityresponse.symantec.com/avcenter/security.risks.tools.list.html.
    5. If there are no removal tools for the security risks that are detected, follow the manual removal instructions listed in the threat report.


Manual Removal
The following instructions pertain to all Symantec antivirus products that support Security Risk detection.
  1. Update the definitions.
  2. Uninstall Adware.180Search using the Add/Remove Programs utility.
  3. Run a full system scan and delete all the files detected as Adware.180Search.
  4. Delete any value added to the registry.
For specific details on each of these steps, read the following instructions.

1. To update the definitions
To obtain the most recent definitions, start your Symantec program and run LiveUpdate.

2. To uninstall the security risk
This security risk includes an uninstallation applet. In order to uninstall this security risk, complete the following instructions:
  1. Click Start > Settings > Control Panel or Start > Control Panel (this varies with the operating system).

  2. In the Control Panel window, double-click Add/Remove Programs.

    Windows Me only: If you do not see the Add/Remove Programs icon, click ...view all Control Panel options.

  3. Click 180Search assistant

    Note:
    You may need to use the scroll bar to view the whole list.

  4. Click Add/Remove, Change/Remove, or Remove (this varies with the operating system). Follow the prompts.

    Note: After running the Add/Remove programs applet, all the files may have been removed. You will want to run a full system scan to ensure that this is the case. However, it is possible that no files will be detected after using Add/Remove programs.

3. To run the scan
  1. Start your Symantec antivirus program, and then run a full system scan.
  2. If any files are detected, and depending on which software version you are using, you may see one or more of the following options:

    Note: This applies only to versions of Norton AntiVirus that support security risk detection. If you are running a version of Symantec AntiVirus Corporate Edition that supports security risk detection, and security risk detection has been enabled, you will only see a message box that gives the results of the scan. If you have questions in this situation, contact your network administrator.
    • Exclude (Not recommended): If you click this button, it will set the risk so that it is no longer detectable. That is, the antivirus program will keep the security risk on your computer and will no longer detect it to remove from your computer.

    • Ignore or Skip: This option tells the scanner to ignore the risk for this scan only. It will be detected again the next time that you run a scan.

    • Cancel: This option is new to Norton Antivirus 2005. It is used when Norton Antivirus 2005 has determined that it cannot delete a security risk. This Cancel option tells the scanner to ignore the risk for this scan only, and thus, the risk will be detected again the next time that you run a scan.

      To actually delete the security risk:
      • Click its file name (under the Filename column).
      • In the Item Information box that displays, write down the full path and file name.
      • Then use Windows Explorer to locate and delete the file.

    • Delete: This option will attempt to delete the detected files. In some cases, the scanner will not be able to do this.
      • If you see a message, "Delete Failed" (or similar message), manually delete the file.
      • Click the file name of the risk that is under the Filename column.
      • In the Item Information box that displays, write down the full path and file name.
      • Then use Windows Explorer to locate and delete the file.

Important: If you are unable to start your Symantec antivirus product or the product reports that it cannot delete a detected file, you may need to stop the risk from running in order to remove it. To do this, run the scan in Safe mode. For instructions, read the document, How to start the computer in Safe Mode. Once you have restarted in Safe mode, run the scan again.

After the files are deleted, restart the computer in Normal mode and proceed with the next section.

Warning messages may be displayed when the computer is restarted, since the risk may not be fully removed at this point. You can ignore these messages and click OK. These messages will not appear when the computer is restarted after the removal instructions have been fully completed. The messages displayed may be similar to the following:

Title: [FILE PATH]
Message body: Windows cannot find [FILE NAME]. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.

4. To delete the value from the registry
Important: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. Read the document: How to make a backup of the Windows registry.
  1. Click Start > Run.
  2. Type regedit

    Then click OK.

    Note: If the registry editor fails to open the risk may have modified the registry to prevent access to the registry editor. Security Response has developed a tool to resolve this problem. Download and run this tool, and then continue with the removal.
  3. Navigate to the key:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  4. In the right pane, delete the values:

    "MSBB" = "[PATH TO FILE]"
    "sau" = "%ProgramFiles%\180search assistant\sau.exe"
    "sac" = "%ProgramFiles%\180searchassistant\sac.exe"
    "sain" = "%ProgramFiles%\180search assistant\sain.exe"
    "salm" = Path to "salm.exe"
    "180ax" = "%userprofile%\local settings\temp\180ax.exe"
    "[RANDOM FILE NAME]" = "%Windir%\[RANDOM FILE NAME].exe"

  5. Navigate to the registry subkey:

    HKEY_CURRENT_USER\Software\Microsoft\RAS Autodial\Control

  6. In the right pane, set the value:

    "LoginSessionDisable" = "0"

  7. Navigate to and delete the following subkeys:

    HKEY_CLASSES_ROOT\CLSID\{B10031B2-F184-4803-9A88-D239C0641D70}
    HKEY_CLASSES_ROOT\Interface\{A79F8202-E09D-4F0F-AD4D-DCAE1DAC5994}
    HKEY_CLASSES_ROOT\TypeLib\{F2BF4713-E933-4B66-8694-22ED243709C7}
    HKEY_CLASSES_ROOT\180SAInstaller.180SAInstaller
    HKEY_CLASSES_ROOT\180SAInstaller.180SAInstaller.1
    HKEY_LOCAL_MACHINE\SOFTWARE\sau
    HKEY_LOCAL_MACHINE\SOFTWARE\sac
    HKEY_LOCAL_MACHINE\SOFTWARE\sain
    HKEY_LOCAL_MACHINE\SOFTWARE\salm
    HKEY_LOCAL_MACHINE\SOFTWARE\180ax
    HKEY_CURRENT_USER\Software\sau
    HKEY_CURRENT_USER\Software\sac
    HKEY_CURRNET_USER\Software\sain
    HKEY_CURRENT_USER\SOFTWARE\salm
    HKEY_CURRENT_USER\SOFTWARE\180ax
    HKEY_CURRENT_USER\Software\180solutions
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\180ax
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\nCASE
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\msbb
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\sac
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\sain
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\salm

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\sau

  8. Exit the Registry Editor.


Search Threats

Search by name
Example: W32.Beagle.AG@mm
STAR Antimalware Protection Technologies
Internet Security Threat Report
Symantec DeepSight Screensaver