Where to find Broadcom NIC drivers.

Article:TECH110697  |  Created: 2009-01-29  |  Updated: 2013-10-30  |  Article URL http://www.symantec.com/docs/TECH110697
Article Type
Technical Solution



The Broadcom driver is available by following the directions below.
  1. Go to http://broadcom.com/
  2. Hover over the "Downloads & Support" menu and click on "Ethernet NICs".
  3. Click on the "Download Drivers" link in the "Download Drivers" section of the page.
  4. Click on the "Download Driver" link just above where your chipset is listed..
  5. If you are adding drivers to WinPE click on  the Windows Vista (32bit) drivers link if you need DOS drivers click on the DOS NDIS2 drivers link.
  6. Accept the licence agreement.
  7. Save the driver to your desktop.
  8. Unzip the driver package.
  9. Use the following instructions to add the Vista driver to WinPE or the NDIS2 drivers to DOS.

Title: 'How to add drivers to DeployAnywhere or WinPE.'
Document ID: 2008050916132860
> Web URL:

Title: 'Adding or modifying DOS NIC templates in the Ghost Boot Wizard'
Document ID: 2000011211551725
> Web URL:

Legacy ID


Article URL http://www.symantec.com/docs/TECH110697

Terms of use for this information are found in Legal Notices