Mirror plex status is "recoverable" - Veritas Storage Foundation for Windows

Article:TECH172221  |  Created: 2011-10-19  |  Updated: 2014-01-28  |  Article URL http://www.symantec.com/docs/TECH172221
Article Type
Technical Solution


The status of the plex of a mirrored volume is listed as "recoverable."


If there is a temporary interruption in data access to the disks, the plexes of the mirror may no longer be synchronized with each other.


This article is a part of a set on troubleshooting failed, or failing, disks. Click here to start at the beginning: http://www.symantec.com/docs/TECH200618

Verify that the status of the disk is not failed or failing. If the status of the disk is normal, the volume can be repaired.

1. Right-click on the volume and select "Repair Volume."

2. In the box that appears, select the plex that was listed as "recoverable." The mirror will now begin to resynchronize.

Note: The name of the plex can be determined by selecting the volume and clicking the Subdisks tab.

WARNING: A mirror resynchronization will cause elevated I/O activity on the disk array. In some cases, it may be best to wait until off-peak hours before starting a repair.


Article URL http://www.symantec.com/docs/TECH172221

Terms of use for this information are found in Legal Notices