Boot order for NetBackup 5220 appliances

Article:TECH199155  |  Created: 2012-10-30  |  Updated: 2013-10-29  |  Article URL http://www.symantec.com/docs/TECH199155
NOTE: If you are experiencing this particular known issue, we recommend that you Subscribe to receive email notification each time this article is updated. Subscribers will be the first to learn about any releases, status changes, workarounds or decisions made.
Article Type
Technical Solution

Product(s)

Issue



When Symantec Storage Shelf is added or re-added to the Main appliance, we always have to change and/or check whether the boot order sequence is correct in the BIOS. The purpose of this technote is to discuss why we need to do this.


Environment



NetBackup 5220 appliances


Cause



We have to change the boot sequence manually because it changes each time a Symantec Storage Shelf is attached or re-attached, and this means that 5220 appliances does not have the static boot option.


Solution



Change the boot sequence manually via the BIOS setup.

For the correct boot device order, please refer to TECH184554.





Article URL http://www.symantec.com/docs/TECH199155


Terms of use for this information are found in Legal Notices