Ghost Solution Suite

 View Only

  • 1.  ABORT (45001) in Ghost Walker

    Posted Jun 11, 2007 09:37 AM
    I am having an issue when restoring a hard drive using GSS.  Ghost will complete the clone operation, but sometimes Ghost Walker will crash with the following error message:

    ABORT (45001):  ERROR WRITING SECTOR(S) TO DISK 1:  DISK NOT LOCKED

    Is there anything that can be done to remedy this, or does it just indicate a bad hard disk?  I've scoured both Google and these forums and have found nothing on this error.

    Thanks!


  • 2.  RE: ABORT (45001) in Ghost Walker

    Posted Jun 13, 2007 02:59 AM
    if you have a bad hard disk, ghost should complain about it when it restore an image.
    are you using the console task to run ghost walker or as a standard alone?
     
     


  • 3.  RE: ABORT (45001) in Ghost Walker

    Posted Sep 10, 2007 10:53 AM
    Hello,
    we have the nearly the same problems, but with a timeout.
     
    ABORT (45001): Error writing sector(s) to disk 1: Int 13 error: timeout (0x80)

    I use ghostwalk from GSS 2.0.1
    With a Compaq6715b Notebook with German Vista Business Version 32bit
    booting with a IBM-DOS-Bootdisk and alternativly with a Microsoft Security CD-Rom
     
    The entered command was
    ghstwalk /bv=1:1 /cn="HP<RANDOM_HEX>" /IGNORE_ENCRYPTFILES
     
    (without the IGNORE_ENCRYPTFILES the computer stops responding)

    After hours, the old SID will be displayed, and the new one will be created and writing accepted.
    Then after hours I get the error message above.

    Can anybody help me?
    Thank you.
    Mike
     


  • 4.  RE: ABORT (45001) in Ghost Walker

    Posted Sep 12, 2007 04:44 AM
    I changed the sid now with systernals newsid.
    Booting with the Microsoft security CD.
    That worked with Vista Business and HP/Compaq 6715b.