Ghost Solution Suite

I received a boot stick with Ghost 11 from my predecessor for cloning my demo image. For the first boots two month ago everything wents fine, but now, when I boot from the USB stick, Windows PE starts and after a few seconds I get a blue screen with the message "Bugcode USB3 DRV". Since the machine is up for a few seconds only before the blue screen appears I'm wondering how to copy the needed driver files into the windows image.

...And I don't know where to copy driver files since I don't have that much experience with Ghost and the boot sticks created for Ghost.

Any help is appreciated.

By Ghost 11, do you mean Ghost Solution Suite 2.5 ?  It would be helpful to know exactly what version of the Ghost executables you are using. The internal versions are 11.0.xx.xxxx or 11.5.xx.xxxx

There are also other limitations of Ghost 2.5 - it does not work with UEFI bioses, for example. It also uses WinPE 2.x which is based on the Vista kernel and therefore needs Vista 32 bit drivers for WinPE to boot correctly. There are technotes in Connect by Terry Bu about how to update WinPE to version 3.1, which uses Win 7 drivers, so have a hunt for them if you feel ready to update.

That is why most users working with Windows 10 and modern machines have updated to Ghost Solution Suite 3.x which brings support for UEFI and also can utilise WinPE 10 as shipped in the Windows 10 ADK.

If your machine has a USB-2 port which you could use instead of a USB-3 port then try that as well. Sometimes you need USB3 drivers when working with USB3 ports although most modern machines now support USB-3 via the bios.

Sorry for the late reply. The issue is solved now.
My colleagues created a new Ghost stick for me containing USB3.0 drivers.

BTW: Using a USB 2.0 port on my laptop didn't work.it was always requesting USB 3.0 drivers.

Thanky you very much for your support!

BTW: I just see "Mark as offensive", but no "Mark as solution"

Interesting - I cannot see the "Mark as Solution" link either. I will check.