Deployment Solution

 View Only

  • 1.  dc7900

    Posted Jun 10, 2009 10:43 AM
    HI

    I just buy an Dc7900 .I'm trying to restore an image using winpe or linux and it's imposiible to finish.

    With WINPE always the same error : DHCP client Retry and with linux i can restore an image with emulation RAID and AHCI but not with IDE.

    Help,please


  • 2.  RE: dc7900

    Posted Jun 10, 2009 10:48 AM
    Sounds like its not loading the correct NIC driver in WinPE. Make sure you have the correct driver for that model in your WinPE boot disk.


  • 3.  RE: dc7900

    Posted Jun 10, 2009 03:13 PM
    Do a search for '7900' and you will get several hits. You need to add NIC drivers for PE and the AHCI drivers for Linux.


  • 4.  RE: dc7900

    Posted Jun 12, 2009 02:24 AM
    Hi

    I'm  using WinPe 2.0 and the drivers are Vista 32 drivers .I just loaded using "have disk" but it doesn't work .Always the same error : DHCP client retry 1,2,3,etc.


  • 5.  RE: dc7900

    Posted Jun 12, 2009 02:27 AM
    Hi

    Wich drivers ,maybe vista 32 drivers and have i injected using "have disk"?

    Thanks


  • 6.  RE: dc7900

    Posted Jun 12, 2009 11:09 AM
    Well if you want to use PE, then use the Vista drivers for the NIC card that's in the PC. You can extract them from the vendor or HP installer then 'have disk' and point to INF.


  • 7.  RE: dc7900

    Posted Jun 12, 2009 04:02 PM
    If you use linux as the PXE OS, you will need to update your NIC drivers. This is the article for the Intel NIC driver and the Storage driver.

    Article ID: 45286