Ghost Solution Suite

Hi there, I could use help with the following warning while capturing an image.

Running gss 3.0 build 1246.

Using a HP Z240 with the problematic I219LM driver.

I can't seem to figure out what was causing the issue. 

I have tried the following: https://support.symantec.com/en_US/article.TECH127617.html 

Task:        Created disk image          

Completed:    3/28/2017 4:07:37 PM         

Module:        User Defined         

Level:        Error         

Status:        Error -99 during imaging process         

Result:        Failed (Status code: 1)

Lauren,

Error -99 usually has to do with authentication, specifically the credentials entered in your pxe/automation configuration. I would modify your configuration and re-enter the credentials, making sure not to accidentally enter them incorrectly.

Also, you are on the GA version of GSS 3.0 (original release) I would at a minimum upgrade to the GSS 3.0 MP5 but ideally would recommend going to GSS 3.1 MP6 (latest version).

Edit: GSS 3.2 is now out