Ghost Solution Suite

hi

server-windows server 2012

clinet-windows 10 1703

network adapter : Intel 82574L gigabit network connection

pnp device id : PCI\VEN_8086&DEV_10D3&SUBSYS_07D015AD&REV_00\000C29FFFF44AA7C00

driver : e1i63x64

i want to use ghostcast (tool-ghost cast server-multi cast)

when boot from client to the automation folder,

the ghost dos screen is turned on and then off again

I think it's a NIC problem. I looked for the driver and I can not find it.

i don't know this problem

thankyou

What EXACT version of Ghost are you using?  What version of WinPE ?

Ghost Solution Suite 3.2

WinPE 10.0

thank you

Have you looked on the Intel site for drivers for your chipset?

You will need drivers for Win 10 64 bit to match your Win PE 10 64 bit boot environment.

Are you familiar with using DRVLOAD in WinPE to dynamically load candidate drivers and then test to see if they are working?  There are technotes about this in Connect going back to WinPE 2, but report back if you can't find them.

i checked the chipset .

it is intel 82443bx/zx.

but i couldn't look for intel 82443bx/zx driver....

how can i do this problem?

thank you for the reply

seungyeon,

If you are missing a driver you can follow the below documentation, the example in the article is for a network driver but the same should apply for other drivers. If you are having a network driver issue, usually you will see a "Restarting DHCP" error. 

Adding Custom Drivers For Winpe in Ghost Solution Suite 3.x 
https://support.symantec.com/en_US/article.HOWTO124400.html

How To Add Drivers To Ghost Solution Suite
https://support.symantec.com/en_US/article.HOWTO124704.html

Let me know if you need anything further.