Protection Engine for Network Attached Storage

 View Only

  • 1.  How to verify Symantec Protection Engine for NAS 7.9 is working

    Posted Sep 16, 2017 01:31 PM

    I have done installation of Symantec Protection Engine and done configuration in NAS and SPE 7.9 through  ICAP protocol (both SPE and NAS with same IPs)

    Port no 1344 is open on SPE and i also Check Enable trickle to enable the data trickle feature.

    Now i the issue is i dont know that its working or not its scanning or not ?

    is there any way to verfiy that configuration which i did is right or wrong ?

     



  • 2.  RE: How to verify Symantec Protection Engine for NAS 7.9 is working

    Broadcom Employee
    Posted Sep 18, 2017 10:22 AM

    You can follow the steps in this document to test Protection Engine using the provided Command-Line Scanner utility:

    https://support.symantec.com/en_US/article.TECH88374.html