Endpoint Protection

 View Only
  • 1.  NetWare / Windows 2003 environment

    Posted Oct 30, 2009 12:34 PM
    We have Windows XP workstations with unmanaged Endpoint 11.0 clients attached to a Windows 2003 SBS and a NetWare 4.2 Server. Everything is working OK except the NetWare Server drive mappings from the client computers. We disabled Endpoint on the clients and can connect to NetWare. How can we configure Endpoint to allow the clients to connect to the NetWare drives?
    We tried to allow Novell in the network configuration of the firewall using the Endpoint Manager Console but it didn't solve the problem.
    Thanks for your help
    Aidan


  • 2.  RE: NetWare / Windows 2003 environment

    Posted Oct 30, 2009 01:11 PM
    Did you try putting an "Allow All" rule at the top of your FW policy? If not, then try that to eliminate the Symantec firewall as the cause.

    You might also try searching the Novell forums for answers.

    http://forums.novell.com/

    BTW, Netware 4.2 is a really old version.


  • 3.  RE: NetWare / Windows 2003 environment

    Posted Oct 30, 2009 01:49 PM
    Thanks for your help. I'll try the "Allow All" rule.
    NetWare 4.2 is being transitioned out and replaced with Windows but the old applications on NetWare are still necessary until the beginning of next year.
    Thanks again!