Ghost Solution Suite

 View Only
  • 1.  Restarting DHCP... Failure for HP elitedesk 800 G3

    Posted Jun 20, 2017 01:32 PM
      |   view attached

    I have tried adding the newest driver to the Boot Disk Creator and everything else i have found online. Is there anyone out there that can help me get this machine imaged?



  • 2.  RE: Restarting DHCP... Failure for HP elitedesk 800 G3
    Best Answer

    Posted Jun 20, 2017 01:41 PM

    Mike,

    The below articles should help you locate the correct driver and upload it into your GSS configuration. Make sure to follow the first article thoroughly, including checking the downloaded driver for your pci ven number.

    Adding Custom Drivers For Winpe in Ghost Solution Suite 3.x 
    https://support.symantec.com/en_US/article.HOWTO124400.html

    How To Add Drivers To Ghost Solution Suite
    https://support.symantec.com/en_US/article.HOWTO124704.html

     

    Let me know if this does not work or you require further explanation.



  • 3.  RE: Restarting DHCP... Failure for HP elitedesk 800 G3

    Posted Jun 20, 2017 01:48 PM

    It is a windows 10 install. with the intel ethernet connection 1219-LM nic driver. I also cant get the bios to accept the setting of "legacy boot enable and secure boot disable" in the elitedesk mini. I get the system error 85.