Data Loss Prevention

 View Only
  • 1.  Single-tier or Two-tier for 2400 agent licenses?

    Posted Oct 13, 2017 02:47 AM

    Can a single tier Installation support 2400 agents to connect. If yes then what are the system requirements (RAM and all). If no then what are the system requirements for two-tier installation.



  • 2.  RE: Single-tier or Two-tier for 2400 agent licenses?
    Best Answer

    Posted Oct 13, 2017 07:36 AM

    Single Tier is not recommended for over 1000.

    If you were going to try - the specs would have to be quite high - 8 Core, 3TB and 64GB RAM.

    Attached are system requirments.



  • 3.  RE: Single-tier or Two-tier for 2400 agent licenses?

    Trusted Advisor
    Posted Oct 13, 2017 11:01 AM

    I would not recommend Single Tier over 1000.

    As suggested above, the spec would be on the higher side.

    Regards,



  • 4.  RE: Single-tier or Two-tier for 2400 agent licenses?

    Posted Oct 14, 2017 05:05 AM

    Hi  Aishwarya,

     

    In first time: I no recomend Single Tier (only for Demos, POCs, ...) In your case Two Tier.

    For 2400 agents, it is considered "Small/Medium Enterprise" (up to 10.000). The HW reqirements that you need for this installation are:

    Required for Enforce Server Network Monitor Other Detection Servers
    Processor 2 x 3.0 GHz CPU 2 x 3.0 GHz CPU 2 x 3.0 GHz CPU
    Memory 6–8 GB RAM (EDM/IDM size
    can increase memory
    requirements)
    Two-tier deployments may
    require additional memory for
    running Oracle.
    6–8 GB RAM (EDM/IDM size
    can increase memory
    requirements. See the
    Symantec Data Loss
    Prevention Administration
    Guide for information about
    EDM and IDM sizing.)
    6–8 GB RAM (EDM/IDM size
    can increase memory
    requirements. See the
    Symantec Data Loss
    Prevention Administration
    Guide for information about
    EDM and IDM sizing.)
    Disk 500 GB, RAID 1+0 or RAID 140 GB
    5 configuration is
    recommended. RAID 5 is not
    recommended for computers
    that host the Oracle
    database.
    For Network Discover/Cloud
    Storage Discover
    deployments, approximately
    150 MB of disk space is
    required to maintain
    incremental scan indexes.
    This is based on an overhead
    of 5 MB per incremental scan
    target and 50 bytes per item
    in the target.
    140 GB 140 GB
    For Network Discover/Cloud
    Storage Discover
    deployments, approximately
    150 MB of disk space is
    required to maintain
    incremental scan indexes.
    This is based on an overhead
    of 5 MB per incremental scan
    target and 50 bytes per item
    in the target.
    NICs 1 copper or fiber 1 Gb/100
    Mb Ethernet NIC to
    communicate with detection
    servers.
    1 copper or fiber 1 Gb/100
    Mb Ethernet NIC to
    communicate with the
    Enforce Server.
    1 copper or fiber 1 Gb/100
    Mb Ethernet NIC to
    communicate with the
    Enforce Server.

     

    I hope to help you!

    Cheers.