Ghost Solution Suite

 View Only

  • 1.  USB HDD, USB Stick are not detected by Ghost 11.5

    Posted May 20, 2016 08:39 AM

    Hi,

    maybe here someone can help, thx

    Any external USB HDD, USB Stick are not detected by Ghost, Ghost only visable SATA disk and virtual ghost disk(X), and it`s impassiblle do it image using Ghost, after add USB driver to boot.wim (from win7, [XP,VISTA - not available]): iusb3hub.sys,iusb3xhc.sys, ofcorses using AIK v1.0 to XPSP2,Vista, using command PEImg problem presist. IF add to boot.wim: iusb3hcs.sys (inf. file corrupted). It`s very strong, any idea how can do`it image using Ghost?. 

    Ghost 11.5 fully support the Intel Skylake platform and/or xHCI / USB3.0/ ?,

    because PC/Mobile where i try do it image have this chipset and using drive: Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver_4.0.4.51.

    thx a lot

    regards



  • 2.  RE: USB HDD, USB Stick are not detected by Ghost 11.5

    Posted May 23, 2016 06:27 AM

    https://www-secure.symantec.com/connect/articles/creating-and-using-winpe31-image-gss-251

    This will show you how to produce a WinPE version that works with your version of Ghost and can use Win 7 drivers.



  • 3.  RE: USB HDD, USB Stick are not detected by Ghost 11.5

    Posted May 23, 2016 09:49 AM

    Ghost 11.5 is much older than the Skylake chipset but as long as you can boot a version of WinPE with the correct drivers for the machine NIC and SATA chipsets then you should be able to image.

    I have tested WinPE 2.x with USB3 drivers some years ago and all was OK.  However, it is hard to get Vista drivers for WinPE 2.x so better to use WinPE 3.1 or upgrade to GSS 3.1