W32.Cone.D@mm

Printer Friendly Page

Discovered: March 10, 2004
Updated: February 13, 2007 12:18:54 PM
Type: Worm
Systems Affected: Windows


W32.Cone.D@mm is a mass-mailing worm that uses its own SMTP engine to send itself to the email addresses it gathers from the files on an infected computer.

The email attachment will have a .exe or .zip file extension.

This threat is written in Microsoft Visual C++ and is compressed with UPX.

Antivirus Protection Dates

  • Initial Rapid Release version March 11, 2004
  • Latest Rapid Release version September 28, 2010 revision 054
  • Initial Daily Certified version March 11, 2004
  • Latest Daily Certified version September 28, 2010 revision 036
  • Initial Weekly Certified release date March 13, 2004

Click here for a more detailed description of Rapid Release and Daily Certified virus definitions.

Writeup By: Yana Liu

Discovered: March 10, 2004
Updated: February 13, 2007 12:18:54 PM
Type: Worm
Systems Affected: Windows


When W32.Cone.D@mm runs, it does the following:

  1. Copies itself to the following files:
    • %Windir%\tasks\svchost.exe
    • %System%\01enel.dll
    • %Temp%\svchost.exe
    • %Temp%\an27XXX.exe


      Notes:
    • %Windir% is a variable: The worm locates the Windows installation folder (by default, this is C:\Windows or C:\Winnt) and copies itself to that location.
    • %System% is a variable. The worm locates the System folder and copies itself to that location. By default, this is C:\Windows\System (Windows 95/98/Me), C:\Winnt\System32 (Windows NT/2000), or C:\Windows\System32 (Windows XP).
    • %Temp% is a variable. The worm locates the temporary folder and copies itself to that location. By default, this is C:\Windows\TEMP (Windows 95/98/Me), or C:\WINNT\Temp (Windows NT/2000), or C:\Document and Settings\<UserName>\Local Settings\Temp (Windows XP).

  2. Copies itself as WebCheck.pif into the current user's startup folder and the All Users startup folders.

    On Windows NT/2000/XP computers, these folders are:
    • C:\Documents and Settings\All Users\Start Menu\Programs\Startup
    • C:\Documents and Settings\<current user>\Start Menu\Programs\Startup


      On Windows 95/98/Me computers these folders are:
    • C:\WINDOWS\All Users\Start Menu\Programs\StartUp
    • C:\WINDOWS\Start Menu\Programs\StartUp

  3. Creates the file, %Temp%\Doc, and opens it with Notepad.exe. %Temp%\Doc contains some garbage data. The worm deletes this file after it is displayed.

  4. Adds a value:

    "Task Monitoring Service"="%Windir%\tasks\svchost.exe"

    to the registry keys:
    • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
    • HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

      so that the worm runs when you start Windows.

  5. Creates the following files:
    • %Temp%\n27xxx.dip (A zip archive of the worm)
    • %Temp%file.dll (A MIME-64-encoded zip archive of the worm)
    • %Windir%\Cyclone.v0.0002.htm (This file, which is 877 bytes, is not viral by itself.)
    • %Temp%01http.dll
    • %System%\01check.dll
    • %System%\01eml.dll
    • %System%\01seml.dll
    • %System%\01url.dll
    • %System%\01vis.dll

  6. Creates the mutex "<the infected computer name>!This is the first real version :"

    This mutex allows only one instance of the worm to execute.

  7. Retrieves email addresses from files with the following extensions:
    • .mbx
    • .wab
    • .html
    • .eml
    • .htm
    • .asp
    • .shtml
    • .txt
    • .dbx

  8. Uses its own SMTP engine to send itself to the email addresses found above.

    The email has the following characteristics:
    From: <spoofed>
    Subject: (One of the following)
    • RE: the attachment is in the SKY [weN]
    • How cute is your credit card number!! :))
    • E-mail account disabling warning for %s
    • the attachment is in the SKY [weN]
    • Hi
    • i have your password :)
    • RE: Thank You!
    • RE: details (%s)
    • Password Reset For %s
    • Undelivered Mail Returned to Sender (%s)
    • about you
    • Your account (%s) will be closed
    • Your IP has been logged
    • Mail Delivery System (%s)
    • Mail Transaction Failed (%s)
    • IMPORTANT %s!
    • Confidential user information!

      where %s is the recipient name.

      Message: (One of the following)
    • Hi lucky,
      The attachment is a virus do not open it.
      I write it to say : we don't want islamic republic in IRAN!
      I'm realy sorry, I'm damaging some computers that I don't want to damage!!!!
    • Dear user of <recipient name>,
      We warn you about some attacks on your e-mail account. Your computer may contain viruses, in order to keep your computer and e-mail account safe,
      please, follow the instructions.
      The Management,
           The <recipient's domain> team                       http: //www.<recipient's domain>
    • take it easy
    • I have your password :)
    • The zip archive attached.<br>extract it and then read the text file!
    • i zip your password (and some other info) :))
      I have it too!
      you can change it, but...!
    • Warning!!!
      This message contains (attached) users personal info and you may not use it for personal use,
      remember that you accept the agreement,
      and you are responsible for any kind of misuse of the users personal info.
    • i zip it for you.
    • i can't find anything usefull in your attachment.
    • See the attached file for details
    • your credit card information attached :))
    • do you can imagine?
      a <random letters> in a zip file!
    • The message contains Unicode (Chinese) characters and has been sent as an attachment (in binary).
    • Details Attached.

      Attachment: The attachment file name is <eight random letters or digits>.exe. The worm may send a .zip file containing this executable.


Recommendations

Symantec Security Response encourages all users and administrators to adhere to the following basic security "best practices":

  • Use a firewall to block all incoming connections from the Internet to services that should not be publicly available. By default, you should deny all incoming connections and only allow services you explicitly want to offer to the outside world.
  • Enforce a password policy. Complex passwords make it difficult to crack password files on compromised computers. This helps to prevent or limit damage when a computer is compromised.
  • Ensure that programs and users of the computer use the lowest level of privileges necessary to complete a task. When prompted for a root or UAC password, ensure that the program asking for administration-level access is a legitimate application.
  • Disable AutoPlay to prevent the automatic launching of executable files on network and removable drives, and disconnect the drives when not required. If write access is not required, enable read-only mode if the option is available.
  • Turn off file sharing if not needed. If file sharing is required, use ACLs and password protection to limit access. Disable anonymous access to shared folders. Grant access only to user accounts with strong passwords to folders that must be shared.
  • Turn off and remove unnecessary services. By default, many operating systems install auxiliary services that are not critical. These services are avenues of attack. If they are removed, threats have less avenues of attack.
  • If a threat exploits one or more network services, disable, or block access to, those services until a patch is applied.
  • Always keep your patch levels up-to-date, especially on computers that host public services and are accessible through the firewall, such as HTTP, FTP, mail, and DNS services.
  • Configure your email server to block or remove email that contains file attachments that are commonly used to spread threats, such as .vbs, .bat, .exe, .pif and .scr files.
  • Isolate compromised computers quickly to prevent threats from spreading further. Perform a forensic analysis and restore the computers using trusted media.
  • Train employees not to open attachments unless they are expecting them. Also, do not execute software that is downloaded from the Internet unless it has been scanned for viruses. Simply visiting a compromised Web site can cause infection if certain browser vulnerabilities are not patched.
  • If Bluetooth is not required for mobile devices, it should be turned off. If you require its use, ensure that the device's visibility is set to "Hidden" so that it cannot be scanned by other Bluetooth devices. If device pairing must be used, ensure that all devices are set to "Unauthorized", requiring authorization for each connection request. Do not accept applications that are unsigned or sent from unknown sources.
  • For further information on the terms used in this document, please refer to the Security Response glossary.

Writeup By: Yana Liu

Discovered: March 10, 2004
Updated: February 13, 2007 12:18:54 PM
Type: Worm
Systems Affected: Windows


The following instructions pertain to all current and recent Symantec antivirus products, including the Symantec AntiVirus and Norton AntiVirus product lines.

  1. Disable System Restore (Windows Me/XP).
  2. Update the virus definitions.
  3. Restart the computer in Safe mode.
  4. Run a full system scan and delete all the files detected as W32.Cone.D@mm.
  5. Delete the value that was added to the registry.

For specific details on each of these steps, read the following instructions.

1. Disabling System Restore (Windows Me/XP)
If you are running Windows Me or Windows XP, we recommend that you temporarily turn off System Restore. Windows Me/XP uses this feature, which is enabled by default, to restore the files on your computer in case they become damaged. If a virus, worm, or Trojan infects a computer, System Restore may back up the virus, worm, or Trojan on the computer.

Windows prevents outside programs, including antivirus programs, from modifying System Restore. Therefore, antivirus programs or tools cannot remove threats in the System Restore folder. As a result, System Restore has the potential of restoring an infected file on your computer, even after you have cleaned the infected files from all the other locations.

Also, a virus scan may detect a threat in the System Restore folder even though you have removed the threat.

For instructions on how to turn off System Restore, read your Windows documentation, or one of the following articles:
Note: When you are completely finished with the removal procedure and you are satisfied that the threat has been removed, re-enable System Restore by following the instructions in the aforementioned documents.

For additional information, and an alternative to disabling Windows Me System Restore, see the Microsoft Knowledge Base article, "Antivirus Tools Cannot Clean Infected Files in the _Restore Folder ," Article ID: Q263455.

2. Updating the virus definitions
Symantec Security Response fully tests all the virus definitions for quality assurance before they are posted to our servers. There are two ways to obtain the most recent virus definitions:
  • Running LiveUpdate, which is the easiest way to obtain virus definitions: These virus definitions are posted to the LiveUpdate servers once each week (usually on Wednesdays), unless there is a major virus outbreak. To determine whether definitions for this threat are available by LiveUpdate, refer to the Virus Definitions (LiveUpdate).
  • Downloading the definitions using the Intelligent Updater: The Intelligent Updater virus definitions are posted on U.S. business days (Monday through Friday). You should download the definitions from the Symantec Security Response Web site and manually install them. To determine whether definitions for this threat are available by the Intelligent Updater, refer to the Virus Definitions (Intelligent Updater).

    The Intelligent Updater virus definitions are available: Read "How to update virus definition files using the Intelligent Updater" for detailed instructions.
3. Restarting the computer in Safe mode
Shut down the computer and turn off the power. Wait for at least 30 seconds, and then restart the computer in Safe mode. For instructions, read the document, "How to start the computer in Safe Mode ."


4. Scanning for and deleting the infected files
  1. Start your Symantec antivirus program and make sure that it is configured to scan all the files.
  2. Run a full system scan.
  3. If any files are detected as infected with W32.Cone.D@mm, click Delete.

5. Deleting the value from the registry


WARNING: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified keys only. Read the document, "How to make a backup of the Windows registry ," for instructions.
  1. Click Start, and then click Run. (The Run dialog box appears.)
  2. Type regedit

    Then click OK. (The Registry Editor opens.)

  3. Navigate to each of the following keys:
    • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
    • HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  4. In the right pane, delete the value:

    "Task Monitoring Service"="%Windir%\tasks\svchost.exe"

  5. Exit the Registry Editor.


Writeup By: Yana Liu