W32.Elitper.B@mm

Printer Friendly Page

Discovered: March 10, 2005
Updated: February 13, 2007 12:35:07 PM
Type: Worm
Systems Affected: Windows


W32.Elitper.B@mm is a worm that spreads through file-sharing networks and lowers Windows security settings. The worm is written in Microsoft Visual Basic.



Restore Microsoft Word and your Symantec AntiVirus product
It may be necessary to restore the msword.exe and scrblock.dll files that the threat attempts to delete. This may require reinstalling these programs.


Removing entries from the Hosts file
If this threat has modified the Windows Hosts file, there are two ways to remove these entries:

  • Install and run the current version of LiveUpdate. This will remove only the entries that refer to Symantec domains.
  • Manually edit the Hosts file and remove all the entries that the worm added.

To run the current version of LiveUpdate
  1. Click download LiveUpdate.

    Note:
    If you are not reading this Web page on the computer that is getting the error notice, the address for downloading the file is:

    ftp://ftp.symantec.com/public/english_us_canada/liveupdate/lusetup.exe

    If necessary, you can type this address into the address bar of the problem computer. Changes to the Hosts file will not stop you from getting to this site.

  2. Save the file to the Windows desktop.
  3. Double-click the lusetup.exe icon on the desktop to install LiveUpdate.
  4. Run LiveUpdate.
  5. Did you see the message "LU1860: LiveUpdate has detected a potential security compromise on your computer"?
    • If you did, let LiveUpdate "Remove these entries from the hosts files" (Recommended).
      This should allow LiveUpdate to run.
    • If you did not, that was not the cause of the problem. Return to the Removal section.


To manually edit the Hosts file and remove all the entries that the worm added

Note: The location of the Hosts file may vary and some computers may not have this file. For example, if the file exists in Windows 98, it will usually be in C:\Windows; and it is located in the C:\WINNT\system32\drivers\etc folder in Windows 2000. There may also be multiple copies of this file in different locations.


Follow the instructions for your operating system:
  • Windows 95/98/Me/NT/2000
    1. Click Start, point to Find or Search, and then click Files or Folders.
    2. Make sure that "Look in" is set to (C:) and that "Include subfolders" is checked.
    3. In the "Named" or "Search for..." box, type:

      hosts

    4. Click Find Now or Search Now.
    5. For each Hosts file that you find, right-click the file, and then click Open With.
    6. Deselect the "Always use this program to open this program" check box.
    7. Scroll through the list of programs and double-click Notepad.
    8. When the file opens, delete all the entries in Step 22 of the "Technical Details" section.
    9. Close Notepad and save your changes when prompted.

  • Windows XP
    1. Click Start > Search.
    2. Click All files and folders.
    3. In the "All or part of the file name" box, type:

      hosts

    4. Verify that "Look in" is set to "Local Hard Drives" or to (C:).
    5. Click More advanced options.
    6. Check Search system folders.
    7. Check Search subfolders.
    8. Click Search.
    9. Click Find Now or Search Now.
    10. For each Hosts file that you find, right-click the file, and then click Open With.
    11. Deselect the Always use this program to open this program check box.
    12. Scroll through the list of programs and double-click Notepad.
    13. When the file opens, delete all the entries in Step 22 of the "Technical Details" section.
    14. Close Notepad and save your changes when prompted.



Reversing the changes that were made to the registry
Because the worm modified the registry so that you cannot (or should not) run regedit.exe, rename the Registry Editor as a file and then run that file.
  1. Navigate to the %Windir% folder.

    Note: %Windir% is a variable that refers to the Windows installation folder. By default, this is C:\Windows or C:\Winnt.

  2. Locate the regedit.exe file.

  3. Right-click on regedit.exe, select rename, and rename the file name to rgedt.exe.

  4. Double-click rgedt.exe.

  5. Before continuing, Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. For instructions, read the document, "How to make a backup of the Windows registry."

  6. Navigate to and select the subkey:

    HKEY_LOCAL_MACHINE\Software\Classes\exefile\shell\open\command

    NOTE: The HKEY_LOCAL_MACHINE\Software\Classes subkey contains many subkey entries that refer to other file extensions. One of these file extensions is .exe. Changing this extension can prevent any files ending with a .exe extension from running. Make sure that you completely browse through this path until you reach the \command subkey.

    Modify the HKEY_LOCAL_MACHINE\Software\Classes\exefile\shell\open\command subkey, shown in the following figure:


    <<=== NOTE: Modify this subkey.

  7. In the right pane, double-click the (Default) value.
  8. Delete the current value data, and then type:

    "%1" %*

    That is, type the characters: quote-percent-one-quote-space-percent-asterisk.

    NOTES
    • Under Windows 95/98/Me/NT, the Registry Editor automatically encloses the value within quotation marks. When you click OK, the (Default) value should look exactly like this:

      ""%1" %*"  
    • Under Windows 2000/XP, the additional quotation marks will not appear. When you click OK, the (Default) value should look exactly like this:

      "%1" %*
    • Make sure that you completely delete all the value data in the command subkey before typing the correct data. If you leave a space at the beginning of the entry, any attempt to run the program files will result in the error message, "Windows cannot find .exe." If this occurs, restart the entire process from the beginning of this document and make sure that you completely remove the current value data.

  9. Exit the Registry Editor.

  10. Rename rgedt.exe back to regedit.exe.


Antivirus Protection Dates

  • Initial Rapid Release version March 10, 2005
  • Latest Rapid Release version September 28, 2010 revision 054
  • Initial Daily Certified version March 10, 2005
  • Latest Daily Certified version September 28, 2010 revision 036
  • Initial Weekly Certified release date March 13, 2005

Click here for a more detailed description of Rapid Release and Daily Certified virus definitions.

Writeup By: Candid Wueest

Discovered: March 10, 2005
Updated: February 13, 2007 12:35:07 PM
Type: Worm
Systems Affected: Windows


When W32.Elitper.B@mm is executed, it performs the following actions:

  1. Copies itself as the following:

    • %Windir%\TASKMANAGER.exe
    • %Program Files%\Windows Media Player\ wmlaunch .exe
    • %Program Files%\mIRC\Downloads\WWE DIVAS.exe
    • %UserProfile%\Start Menu\Programs\Startup\XPStartUp

      Notes:
    • %Windir% is a variable that refers to the Windows installation folder. By default, this is C:\Windows or C:\Winnt.
    • %ProgramFiles% is a variable that refers to the program files folder. By default, this is C:\Program Files.
    • %UserProfile% is a variable that refers to the current user's profile folder. By default, this is C:\Documents and Settings\<Current User> (Windows NT/2000/XP).

  2. Creates the following nonmalicious file:

    c:\Virus Detected.txt

  3. Adds the values:

    "Firewall" = "%Program files%\Windows Media Player\[space]wmlaunch[space].exe"
    "Protection" = "%Program files%\Internet Explorer\Firewall.exe"
    "SysRes" = "%Windir%\TASKMANAGER.exe"

    to the registry key:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

    so that it runs every time Windows starts.

  4. Ends the following processes:

    • DAP.exe
    • LSASS.exe
    • PTEditor.exe
    • SVCHOST.exe
    • VB6.exe
    • ccapp.exe
    • dllhost.exe
    • iexplore.exe
    • mdm.exe
    • msgmsgr.exe
    • regedit.com
    • smss.exe

      Note: Termination of the LSASS.exe process may cause the system to automatically shut down.

  5. Adds the vaule:

    "EnableFirewall" = "0"

    to the registry subkeys:

    HKEY_CURRENT_USER\Software\Policies\Microsoft\WindowsFirewall\StandardProfile
    HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\WindowsFirewall\StandardProfile

    which disables the Windows Firewall.

  6. Adds the value:

    "DomainProfile" = "0"

    to the registry subkeys:

    HKEY_CURRENT_USER\SOFTWARE\Policies\Microsoft\WindowsFirewall
    HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\WindowsFirewall

  7. Adds the values:

    "AntiVirusDisableNotify" = "1"
    "FirewallDisableNotify" = "1"
    "UpdatesDisableNotify" = "1"
    "FirewallOverride" = "1"
    "AntiVirusOverride" = "1"

    to the registry subkeys:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Security Center
    HKEY_CURRENT_USER\Software\Microsoft\Security Center

    which disables security notifications from the Windows Security Center.

  8. Adds the values:

    "DisableRegistryTools" = "1"
    "DisableTaskMgr" = "1"

    to the registry subkey:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System

    which disables the Registry Editor and Task Manager.

  9. Adds the value:

    "NoRun" = "1"
    "DisallowRun" = "1"
    "NoFind" = "1"
    "NoCloseKey" = "1"

    to the registry subkey:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

    which will disable access to the Run... function

  10. Adds the values:

    "NoBrowserClose" = "1"
    "NoBrowserSaveAs" = "1"
    "NoFileOpen" = "1"
    "NoPrinting" = "1"

    to the registry subkey:

    HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions

  11. Adds the values:

    "1" = "notepad.exe"
    "2" = "wordpad.exe"
    "3" = "regedit.exe"
    "4" = "msnmsgr.exe"
    "5" = "msmsgs.exe"
    "6" = "gp4.exe"
    "7" = "help.exe"
    "8" = "wmplayer.exe"
    "10" = "excel.exe"
    "11" = "winword.exe"
    "12" = "winhelp.exe"
    "13" = "wmplayer.exe"
    "14" = "winrar.exe"
    "15" = "winzip.exe"
    "16" = "mirc.exe"
    "17" = "ACDSee6.exe"
    "18" = "acrord32.exe"
    "19" = "ntbackup.exe"
    "20" = "moviemk.exe"
    "21" = "defrag.exe"
    "23" = "netstat.exe"
    "25" = "svghost.exe"
    "26" = "shutdown.exe"
    "27" = "sndvol32.exe"
    "28" = "sndrec32.exe"
    "30" = "write.exe"
    "32" = "dxdiag.exe"
    "33" = "ntbackup.exe"
    "38" = "dialer.exe"
    "39" = "findstr.exe"
    "40" = "dllhost.exe"
    "44" = "print.exe"
    "45" = "svchost.exe"
    "46" = "xcopy.exe"
    "47" = "NAVW32.exe"
    "48" = "NAVWNT.exe"
    "49" = "NAVSTUB.exe"
    "50" = "navui.nsi"
    "51" = "CCIMSCN.exe"
    "52" = "MSDEV.exe"
    "54" = "chktrust.exe"
    "55" = "fixblast.exe"
    "56" = "SNDSrvc.exe"
    "57" = "NMain.exe"
    "58" = "A1 DVD Ripper.exe"
    "59" = "vfp6.exe"
    "60" = "setup.exe"
    "61" = "install.exe"
    "62" = "savscan.exe"
    "67" = "ad-aware.exe"
    "68" = "remove.exe"
    "69" = "uninstall.exe"
    "70" = "nero.exe"
    "71" = "uninst.exe"
    "72" = "isuninst.exe"
    "75" = "aawsepersonal.exe"
    "76" = "avast.exe"
    "78" = "keygen.exe"
    "80" = "cmd.exe"
    "81" = "project1.exe"
    "82" = "1.exe"
    "83" = "program.exe"
    "84" = "application.exe"
    "85" = "file.exe"
    "86" = "browser.exe"
    "87" = "UNWISE.exe"
    "88" = "play.exe"
    "89" = "directcd.exe"
    "90" = "bind.exe"

    to the registry subkey:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\DisallowRun

    which will prevent the various processes from running.

  12. Attempts to delete the file %Program Files%\Common Files\Symantec Shared\Script Blocking\scrblock.dll.

  13. Attempts to delete the file %Program Files%\Microsoft Office\Office10\WINWORD.exe and replace it with a copy of itself.

  14. Creates copies of itself named WWE Torrie And Sable Screan Saver.exe in the following folders:

    • %Program files%\KMD\My Shared Folder
    • %Program files%\Kazaa\My Shared Folder
    • %Program files%\KaZaA Lite\My Shared Folder
    • %Program files%\Morpheus\My Shared Folder
    • %Program files%\Grokster\My Grokster
    • %Program files%\BearShare\Shared
    • %Program files%\Edonkey2000\Incoming

  15. Adds the value:

    "Disk" = "CSCFlags=0 MaxUses=4294967295 Path=C:\ Permissions=63 Type=0"

    to the registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Shares

  16. Adds the value:

    "computername" = "surconfluge"

    to the registry key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ComputerName\ActiveComputerName

  17. Adds the value:

    "RegisteredOwner" = "surconfluge"

    to the registry key:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion

  18. Modifies the value:

    "(default)" = "%1" %*

    in the registry subkey:

    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\scrfile\shell\open\Command

    which allows the threat to be run before any screensaver executes.

  19. Runs shell commands to add a user named surconfluge to the compromised computer.

  20. Opens Microsoft Outlook and checks for POP3 email accounts used in Outlook.

  21. Checks for new email on the listed SMTP servers for the accounts found. The worm may attempt to reply to any email found on the server, attaching a copy of itself to the email.

  22. Appends the following lines to the Hosts file to prevent access to certain Web sites:
    127.0.0.1 www.google.com
    127.0.0.1 www.download.com
    127.0.0.1 www.hdpvidz.com
    127.0.0.1 www.urbanchaosvideos.com
    127.0.0.1 www.alltheweb.com
    127.0.0.1 www.yahoo.com
    127.0.0.1 www.hotmail.com
    127.0.0.1 www.wwe.com
    127.0.0.1 www.altavista.com
    127.0.0.1 www.themetsource.com
    127.0.0.1 www.mysongbook.com
    127.0.0.1 www.guitar-pro.com
    127.0.0.1 www.about.com
    127.0.0.1 www.symantec.com
    127.0.0.1 www.mcafee.com
    127.0.0.1 www.trendmicro.com
    127.0.0.1 www.rohitab.com
    127.0.0.1 www.microsoft.com
    127.0.0.1 messenger.hotmail.com
    127.0.0.1 www.microsoft.com/isapi/redir.dll?prd=ie&ar=hotmail
    127.0.0.1 www.msn.com
    127.0.0.1 services.msn.com/svcs/hotmail/httpmail.asp
    127.0.0.1 www.kazaa.com
    127.0.0.1 oe.msn.msnmail.hotmail.com/cgi-bin/hmdata
    127.0.0.1 www.vbcode.com
    127.0.0.1 www.roxio.com
    127.0.0.1 www.nero.com
    127.0.0.1 smackdown.wwe.com
    127.0.0.1 raw.wwe.com
    127.0.0.1 www.net2phone.com
    127.0.0.1 www.geocities.com
    127.0.0.1 www.emp3finder.om
    127.0.0.1 www.regedit.com


Recommendations

Symantec Security Response encourages all users and administrators to adhere to the following basic security "best practices":

  • Use a firewall to block all incoming connections from the Internet to services that should not be publicly available. By default, you should deny all incoming connections and only allow services you explicitly want to offer to the outside world.
  • Enforce a password policy. Complex passwords make it difficult to crack password files on compromised computers. This helps to prevent or limit damage when a computer is compromised.
  • Ensure that programs and users of the computer use the lowest level of privileges necessary to complete a task. When prompted for a root or UAC password, ensure that the program asking for administration-level access is a legitimate application.
  • Disable AutoPlay to prevent the automatic launching of executable files on network and removable drives, and disconnect the drives when not required. If write access is not required, enable read-only mode if the option is available.
  • Turn off file sharing if not needed. If file sharing is required, use ACLs and password protection to limit access. Disable anonymous access to shared folders. Grant access only to user accounts with strong passwords to folders that must be shared.
  • Turn off and remove unnecessary services. By default, many operating systems install auxiliary services that are not critical. These services are avenues of attack. If they are removed, threats have less avenues of attack.
  • If a threat exploits one or more network services, disable, or block access to, those services until a patch is applied.
  • Always keep your patch levels up-to-date, especially on computers that host public services and are accessible through the firewall, such as HTTP, FTP, mail, and DNS services.
  • Configure your email server to block or remove email that contains file attachments that are commonly used to spread threats, such as .vbs, .bat, .exe, .pif and .scr files.
  • Isolate compromised computers quickly to prevent threats from spreading further. Perform a forensic analysis and restore the computers using trusted media.
  • Train employees not to open attachments unless they are expecting them. Also, do not execute software that is downloaded from the Internet unless it has been scanned for viruses. Simply visiting a compromised Web site can cause infection if certain browser vulnerabilities are not patched.
  • If Bluetooth is not required for mobile devices, it should be turned off. If you require its use, ensure that the device's visibility is set to "Hidden" so that it cannot be scanned by other Bluetooth devices. If device pairing must be used, ensure that all devices are set to "Unauthorized", requiring authorization for each connection request. Do not accept applications that are unsigned or sent from unknown sources.
  • For further information on the terms used in this document, please refer to the Security Response glossary.

Writeup By: Candid Wueest

Discovered: March 10, 2005
Updated: February 13, 2007 12:35:07 PM
Type: Worm
Systems Affected: Windows


The following instructions pertain to all current and recent Symantec antivirus products, including the Symantec AntiVirus and Norton AntiVirus product lines.

  1. Disable System Restore (Windows Me/XP).
  2. Update the virus definitions.
  3. Restart the computer in Safe mode or VGA mode.
  4. Use the Security Response "Tool to reset shell\open\command registry subkeys."
  5. Delete the values that were added to the registry.
  6. Run a full system scan and delete all the files detected as W32.Elitper.B@mm.
  7. Restore the Windows Security Center.
For specific details on each of these steps, read the following instructions.

1. To disable System Restore (Windows Me/XP)
If you are running Windows Me or Windows XP, we recommend that you temporarily turn off System Restore. Windows Me/XP uses this feature, which is enabled by default, to restore the files on your computer in case they become damaged. If a virus, worm, or Trojan infects a computer, System Restore may back up the virus, worm, or Trojan on the computer.

Windows prevents outside programs, including antivirus programs, from modifying System Restore. Therefore, antivirus programs or tools cannot remove threats in the System Restore folder. As a result, System Restore has the potential of restoring an infected file on your computer, even after you have cleaned the infected files from all the other locations.

Also, a virus scan may detect a threat in the System Restore folder even though you have removed the threat.

For instructions on how to turn off System Restore, read your Windows documentation, or one of the following articles:
Note:
When you are completely finished with the removal procedure and are satisfied that the threat has been removed, re-enable System Restore by following the instructions in the aforementioned documents.

For additional information, and an alternative to disabling Windows Me System Restore, see the Microsoft Knowledge Base article, "Antivirus Tools Cannot Clean Infected Files in the _Restore Folder ," Article ID: Q263455.

2. To update the virus definitions
Symantec Security Response fully tests all the virus definitions for quality assurance before they are posted to our servers. There are two ways to obtain the most recent virus definitions:
  • Running LiveUpdate, which is the easiest way to obtain virus definitions: These virus definitions are posted to the LiveUpdate servers once each week (usually on Wednesdays), unless there is a major virus outbreak. To determine whether definitions for this threat are available by LiveUpdate, refer to the Virus Definitions (LiveUpdate).
  • Downloading the definitions using the Intelligent Updater: The Intelligent Updater virus definitions are posted daily. You should download the definitions from the Symantec Security Response Web site and manually install them. To determine whether definitions for this threat are available by the Intelligent Updater, refer to the Virus Definitions (Intelligent Updater).

    The Intelligent Updater virus definitions are available: Read "How to update virus definition files using the Intelligent Updater" for detailed instructions.

    Note: If you see an error, such as LU1418, when you try to run LiveUpdate and you cannot get the Web site hosting the Intelligent Updater, it is likely that the worm has modified the Hosts file. You can either download and install LiveUpdate 2.5, which can remove Symantec entries from that file, or you can edit it yourself. See the instructions for both in the "Additional Information" section below.

3. To restart the computer in Safe mode or VGA mode
Shut down the computer and turn off the power. Wait for at least 30 seconds, and then restart the computer in Safe mode or VGA mode.
  • For Windows 95, 98, Me, 2000, or XP users, restart the computer in Safe mode. For instructions, read the document, "How to start the computer in Safe Mode."
  • For Windows NT 4 users, restart the computer in VGA mode.

4. Using the Security Response "Tool to reset shell\open\command registry subkeys."

W32.Elitper.B@mm makes changes to the Windows registry that may prevent you from running the registry editor. Security Response has developed a tool to reset these values to the default settings.

This tool is the easiest way to fix this. Once you have run the tool , return to this page and continue with the removal.

If you cannot obtain the tool, refer to the "Additional Information" section for information on manually reversing the changes.

5. To delete the value from the registry
Important: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. Read the document, "How to make a backup of the Windows registry ," for instructions.
  1. Click Start > Run.

  2. Type regedit

    Then click OK.

  3. Navigate to the subkey:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

  4. In the right pane, delete the values:

    "Firewall" = "%Program files%\Windows Media Player\[space]wmlaunch[space].exe"
    "Protection" = "%Program files%\Internet Explorer\Firewall.exe"
    "SysRes" = "%Windir%\TASKMANAGER.exe"

  5. Navigate to the subkeys:

    HKEY_CURRENT_USER\Software\Microsoft\Security Center
    HKEY_LOCAL_MACHINE\Software\Microsoft\Security Center

  6. In the right pane, delete the values:

    "AntiVirusDisableNotify" = "1"
    "FirewallDisableNotify" = "1"
    "UpdatesDisableNotify" = "1"
    "FirewallOverride" = "1"
    "AntiVirusOverride" = "1"

  7. Navigate to the subkeys:

    HKEY_CURRENT_USER\Software\Policies\Microsoft\WindowsFirewall\StandardProfile
    HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\WindowsFirewall\StandardProfile

  8. In the right pane, delete the value:

    "EnableFirewall" = "0"

  9. Navigate to the subkeys:

    HKEY_CURRENT_USER\Software\Policies\Microsoft\WindowsFirewall
    HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\WindowsFirewall

  10. In the right pane, delete the value:

    "DomainProfile" = "0"

  11. Delete the values:

    "DisableRegistryTools" = "1"
    "DisableTaskMgr" = "1"

    From the registry subkey:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System

  12. Navigate to the subkeys:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  13. In the right pane, delete the values:

    "NoRun" = "1"
    "DisallowRun" = "1"
    "NoFind" = "1"
    "NoCloseKey" = "1"

  14. Navigate to the subkeys:

    HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions

  15. In the right pane, delete the values:

    "NoBrowserClose" = "1"
    "NoBrowserSaveAs" = "1"
    "NoFileOpen" = "1"
    "NoPrinting" = "1"

  16. Navigate to the subkeys:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\DisallowRun

  17. In the right pane, delete the values:

    "1" = "notepad.exe"
    "2" = "wordpad.exe"
    "3" = "regedit.exe"
    "4" = "msnmsgr.exe"
    "5" = "msmsgs.exe"
    "6" = "gp4.exe"
    "7" = "help.exe"
    "8" = "wmplayer.exe"
    "10" = "excel.exe"
    "11" = "winword.exe"
    "12" = "winhelp.exe"
    "13" = "wmplayer.exe"
    "14" = "winrar.exe"
    "15" = "winzip.exe"
    "16" = "mirc.exe"
    "17" = "ACDSee6.exe"
    "18" = "acrord32.exe"
    "19" = "ntbackup.exe"
    "20" = "moviemk.exe"
    "21" = "defrag.exe"
    "23" = "netstat.exe"
    "25" = "svghost.exe"
    "26" = "shutdown.exe"
    "27" = "sndvol32.exe"
    "28" = "sndrec32.exe"
    "30" = "write.exe"
    "32" = "dxdiag.exe"
    "33" = "ntbackup.exe"
    "38" = "dialer.exe"
    "39" = "findstr.exe"
    "40" = "dllhost.exe"
    "44" = "print.exe"
    "45" = "svchost.exe"
    "46" = "xcopy.exe"
    "47" = "NAVW32.exe"
    "48" = "NAVWNT.exe"
    "49" = "NAVSTUB.exe"
    "50" = "navui.nsi"
    "51" = "CCIMSCN.exe"
    "52" = "MSDEV.exe"
    "54" = "chktrust.exe"
    "55" = "fixblast.exe"
    "56" = "SNDSrvc.exe"
    "57" = "NMain.exe"
    "58" = "A1 DVD Ripper.exe"
    "59" = "vfp6.exe"
    "60" = "setup.exe"
    "61" = "install.exe"
    "62" = "savscan.exe"
    "67" = "ad-aware.exe"
    "68" = "remove.exe"
    "69" = "uninstall.exe"
    "70" = "nero.exe"
    "71" = "uninst.exe"
    "72" = "isuninst.exe"
    "75" = "aawsepersonal.exe"
    "76" = "avast.exe"
    "78" = "keygen.exe"
    "80" = "cmd.exe"
    "81" = "project1.exe"
    "82" = "1.exe"
    "83" = "program.exe"
    "84" = "application.exe"
    "85" = "file.exe"
    "86" = "browser.exe"
    "87" = "UNWISE.exe"
    "88" = "play.exe"
    "89" = "directcd.exe"
    "90" = "bind.exe"

  18. Reset the value:

    "computername" = "surconfluge"

    in the registry key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ComputerName\ActiveComputerName

    to the original computer name

  19. Reset the value:

    "RegisteredOwner" = "surconfluge"

    in the registry key:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion

    to the registered owner of the computer.

  20. Navigate to the key

    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\scrfile\shell\open\Command

  21. In the right pane, change the value to:

    "(default)" = ""%1" /S"

  22. Exit the Registry Editor and restart your computer for changes to take effect.

6. To scan for and delete the infected files
  1. Start your Symantec antivirus program and make sure that it is configured to scan all the files.
  2. Run a full system scan.
  3. If any files are detected as infected with W32.Elitper.B@mm, click Delete.

    Note:
    If your Symantec antivirus product reports that it cannot delete an infected file, Windows may be using the file. To fix this, run the scan in Safe mode. For instructions, read the document, "How to start the computer in Safe Mode." Once you have restarted in Safe mode, run the scan again.

    After the files are deleted, restart the computer in Normal mode and proceed with section 7.

7. To restore the Windows Security Center
This threat attempts to disable the features in the Windows Security Center, available in Windows XP Service Pack 2. If you are running Windows XP Service Pack 2 and would like to restore the full functionality of the Windows Security Center, please complete the following steps:

Important: If your computer is connected to a domain, you may not be able to adjust these settings. If so, contact your network administrator for more information.
  1. Click Start > Control Panel.
  2. Double-click the Security Center.
  3. In the right pane, click Windows Firewall. The Windows Firewall appears.
  4. Select On.
  5. Click Ok to close the Windows Firewall.
  6. In the left pane of the Security Center, select Change the way Security Center alerts me.
  7. Click Alert Settings.
  8. Select Alert Settings, Firewall, and Virus Protection.
  9. Click OK
  10. Exit the Security Center.


Writeup By: Candid Wueest