Printer Friendly Page

Discovered: July 02, 2006
Updated: February 13, 2007 12:57:10 PM
Type: Worm
Systems Affected: Windows

W32.Amirecivel.F@mm is a mass-mailing worm that also spreads through file-sharing networks. The worm requires Microsoft .Net Framework 2.0 in order to run.

Antivirus Protection Dates

  • Initial Rapid Release version July 03, 2006
  • Latest Rapid Release version July 06, 2017 revision 020
  • Initial Daily Certified version July 03, 2006
  • Latest Daily Certified version July 07, 2017 revision 004
  • Initial Weekly Certified release date July 05, 2006

Click here for a more detailed description of Rapid Release and Daily Certified virus definitions.

Writeup By: Chen Yu

Discovered: July 02, 2006
Updated: February 13, 2007 12:57:10 PM
Type: Worm
Systems Affected: Windows

When W32.Amirecivel.F@mm is executed, it performs the following actions:

  1. Creates the following file:


    Note: %System% is a variable that refers to the System folder. By default this is C:\Windows\System (Windows 95/98/Me), C:\Winnt\System32 (Windows NT/2000), or C:\Windows\System32 (Windows XP).

  2. Adds the value:

    "SadNet3" = "%System%\WinServicces.cab.bak.exe"

    to the registry subkey:


    so that it is executed every time Windows starts:

  3. Adds the value:

    "SadNet3" = "(_-oO]xX|-|S|-|a|-|d|-|N|-|e|-|t|-|Xx[Oo-_)!"

    to the registry subkey:


  4. Creates the following files in an attempt to spread through file-sharing networks:

    • AmirCivil.pif
    • avg.pif
    • mail.dll.exe
    • Mcafee.exe
    • Nod32.cmd
    • Norton.exe
    • ScreenSaver.scr
    • Services.pif
    • vista.exe
    • winamp.exe

  5. Copies itself as the following files:

    • C:\Program Files\eMule\Incoming\symantec.cmd
    • C:\Program Files\Gnucleus\Downloads\AnyDVD.v6.0.0.4.Cracked-RES.by.Warez.exe
    • C:\Program Files\Kazaa\My Shared Folder\winampa.dll.pif
    • C:\Program Files\Kazaa\My Shared Folder\winampa.dll.pif
    • C:\Program Files\Kazaa\My Shared Folder\winampa.dll.pif
    • C:\Program Files\StreamCast\Morpheus\My Shared Folder\winampa.dll.pif
    • D:\Program Files\eMule\Incoming\symantec.cmd
    • D:\Program Files\Gnucleus\Downloads\AnyDVD.v6.0.0.4.Cracked-RES.by.Warez.exe
    • D:\Program Files\Kazaa\My Shared Folder\project.exe
    • D:\Program Files\Kazaa\My Shared Folder\project.exe
    • D:\Program Files\Kazaa\My Shared Folder\winampa.dll.pif
    • D:\Program Files\StreamCast\Morpheus\My Shared Folder\winampa.dll.pif
    • E:\Program Files\eMule\Incoming\symantec.cmd
    • E:\Program Files\Gnucleus\Downloads\AnyDVD.v6.0.0.4.Cracked-RES.by.Warez.exe
    • E:\Program Files\Kazaa\My Shared Folder\screen_saver!.scr
    • E:\Program Files\Kazaa\My Shared Folder\screen_saver!.scr
    • E:\Program Files\Kazaa\My Shared Folder\winampa2.dll.pif
    • E:\Program Files\StreamCast\Morpheus\My Shared Folder\winampa.dll.pif
    • F:\Program Files\Kazaa\My Shared Folder\winlogon.dll.exe
    • F:\Program Files\Kazaa\My Shared Folder\winlogon.dll.exe
    • H:\Program Files\Kazaa\My Shared Folder\fun.pic.scr
    • H:\Program Files\Kazaa\My Shared Folder\fun.pic.scr
    • J:\Program Files\Kazaa\My Shared Folder\SkyNetAntiVirus.doc.cmd
    • J:\Program Files\Kazaa\My Shared Folder\SkyNetAntiVirus.doc.cmd

      Note: %ProgramFiles% is a variable that refers to the program files folder. By default, this is C:\Program Files.

  6. Gathers email addresses from all .txt and .html files located on the following drives:
    • C
    • D
    • E
    • G
    • F

  7. Sends a copy of itself in an email with the following characteristics:

    (One of the following)

    • avg@yahoo.com
    • bill@yahoo.com
    • bob@yahoo.com
    • ebook@yahoo.com
    • info@yahoo.com
    • LongShot@yahoo.com
    • mail@yahoo.com
    • matt@yahoo.com
    • mcafee@yahoo.com
    • nod32@yahoo.com
    • panda@yahoo.com
    • password@yahoo.com
    • pic@yahoo.com
    • smith@yahoo.com
    • stan@yahoo.com
    • steve@yahoo.com
    • symantec@yahoo.com
    • ted@yahoo.com
    • update@yahoo.com
    • YourFriend@yahoo.com

      (One of the following)

    • Cum a murit Papa?
    • E-mail account disabling warning
    • E-mail technical support message.
    • E-mail warning
    • Email account utilization warning.
    • Encrypted document
    • Fax Message
    • Fax Message Received
    • Important bill!
    • IranSare2008
    • Message Notify
    • NOD32
    • Norton!
    • Pentru Ionel
    • Protected message
    • Text message
    • Yahoo!
    • mcafee

      Message body:
      (One of the following)

    • another pic, have fun! ... :->
    • classroom test of you?
    • Credeti ca ar fi mai bine ca Romania sa-si retraga trupele din Irak anul acesta?Deschideti programul Vot, alegeti votul dvs. si vedeti rezultatele.Parerea dvs. conteaza!
    • Credeti ca ar fi mai bine ca Romania sa-si retraga trupele din Irak anul acesta?Deschideti programul Vot, alegeti votul dvs. si vedeti rezultatele.Parerea dvs. conteaza!
    • hello! i'm your long, lost friend...
    • hi, friend... here are some nice stuffs that i got from the internet... check it out...
    • hmmmn... i guess you've forgotten me... but anyways, i wanna make up... here are the files that made me like the internet more... see for yourself...
    • i hope thats not true!
    • i want you to know how much i care for you...
    • i've got cool stuffs here...
    • Ioana, sex in grup in camin. Cred ca o stii si kindness is a virtue...
    • Message Error
    • nice stuffs i got here...
    • old photos about you?
    • one of the files is a virus... can you tell me which one is it? hehehe, i'm only joking... your friend, paul..
    • sharing files is the essence of living... check this out...
    • the information is wrong!
    • three files for you to keep... always remember that i'm into deep... i don't know you but i think i'm in love...
    • you know amir_civil?!

      (One of the following)

    • AmirCivil.pic.cmd
    • fullmessenger.exe
    • readme.html.cmd
    • register.pif
    • sexy-screensaver.scr

  8. Ends any processes with the following names:

    • ACKWIN32
    • AD-AWARE
    • AGENTW
    • ANTS
    • APLICA32
    • ARR
    • AV32
    • AVE32
    • AVGCC32
    • AVGNT
    • Babylon
    • CFINET
    • CTRL
    • DOORS
    • EXCEL
    • F-AGNT95
    • FCH32
    • FNRB32
    • GhostTray
    • IOMON98
    • LU32
    • NAVAP32
    • NAVW3
    • NAVW32
    • NETD32
    • NETMON
    • NOD32
    • notepad
    • POP3TRAP
    • realplay
    • regedit
    • SCAN32
    • taskmgr
    • TCM
    • vb6
    • W9X

  9. Displays a message box asking the user to shutdown the computer. If the user clicks Yes, the computer will shutdown. The message is displayed every 90 seconds until the user clicks Yes to shutdown the computer.


Symantec Security Response encourages all users and administrators to adhere to the following basic security "best practices":

  • Use a firewall to block all incoming connections from the Internet to services that should not be publicly available. By default, you should deny all incoming connections and only allow services you explicitly want to offer to the outside world.
  • Enforce a password policy. Complex passwords make it difficult to crack password files on compromised computers. This helps to prevent or limit damage when a computer is compromised.
  • Ensure that programs and users of the computer use the lowest level of privileges necessary to complete a task. When prompted for a root or UAC password, ensure that the program asking for administration-level access is a legitimate application.
  • Disable AutoPlay to prevent the automatic launching of executable files on network and removable drives, and disconnect the drives when not required. If write access is not required, enable read-only mode if the option is available.
  • Turn off file sharing if not needed. If file sharing is required, use ACLs and password protection to limit access. Disable anonymous access to shared folders. Grant access only to user accounts with strong passwords to folders that must be shared.
  • Turn off and remove unnecessary services. By default, many operating systems install auxiliary services that are not critical. These services are avenues of attack. If they are removed, threats have less avenues of attack.
  • If a threat exploits one or more network services, disable, or block access to, those services until a patch is applied.
  • Always keep your patch levels up-to-date, especially on computers that host public services and are accessible through the firewall, such as HTTP, FTP, mail, and DNS services.
  • Configure your email server to block or remove email that contains file attachments that are commonly used to spread threats, such as .vbs, .bat, .exe, .pif and .scr files.
  • Isolate compromised computers quickly to prevent threats from spreading further. Perform a forensic analysis and restore the computers using trusted media.
  • Train employees not to open attachments unless they are expecting them. Also, do not execute software that is downloaded from the Internet unless it has been scanned for viruses. Simply visiting a compromised Web site can cause infection if certain browser vulnerabilities are not patched.
  • If Bluetooth is not required for mobile devices, it should be turned off. If you require its use, ensure that the device's visibility is set to "Hidden" so that it cannot be scanned by other Bluetooth devices. If device pairing must be used, ensure that all devices are set to "Unauthorized", requiring authorization for each connection request. Do not accept applications that are unsigned or sent from unknown sources.
  • For further information on the terms used in this document, please refer to the Security Response glossary.

Writeup By: Chen Yu

Discovered: July 02, 2006
Updated: February 13, 2007 12:57:10 PM
Type: Worm
Systems Affected: Windows

The following instructions pertain to all current and recent Symantec antivirus products, including the Symantec AntiVirus and Norton AntiVirus product lines.

  1. Disable System Restore (Windows Me/XP).
  2. Update the virus definitions.
  3. Run a full system scan.
  4. Delete any values added to the registry.
For specific details on each of these steps, read the following instructions.

1. To disable System Restore (Windows Me/XP)
If you are running Windows Me or Windows XP, we recommend that you temporarily turn off System Restore. Windows Me/XP uses this feature, which is enabled by default, to restore the files on your computer in case they become damaged. If a virus, worm, or Trojan infects a computer, System Restore may back up the virus, worm, or Trojan on the computer.

Windows prevents outside programs, including antivirus programs, from modifying System Restore. Therefore, antivirus programs or tools cannot remove threats in the System Restore folder. As a result, System Restore has the potential of restoring an infected file on your computer, even after you have cleaned the infected files from all the other locations.

Also, a virus scan may detect a threat in the System Restore folder even though you have removed the threat.

For instructions on how to turn off System Restore, read your Windows documentation, or one of the following articles:
When you are completely finished with the removal procedure and are satisfied that the threat has been removed, reenable System Restore by following the instructions in the aforementioned documents.

For additional information, and an alternative to disabling Windows Me System Restore, see the Microsoft Knowledge Base article: Antivirus Tools Cannot Clean Infected Files in the _Restore Folder (Article ID: Q263455).

2. To update the virus definitions
Symantec Security Response fully tests all the virus definitions for quality assurance before they are posted to our servers. There are two ways to obtain the most recent virus definitions:
  • Running LiveUpdate, which is the easiest way to obtain virus definitions:
    • If you use Norton AntiVirus 2006, Symantec AntiVirus Corporate Edition 10.0, or newer products, LiveUpdate definitions are updated daily. These products include newer technology.
    • If you use Norton AntiVirus 2005, Symantec AntiVirus Corporate Edition 9.0, or earlier products, LiveUpdate definitions are updated weekly. The exception is major outbreaks, when definitions are updated more often.
  • Downloading the definitions using the Intelligent Updater: The Intelligent Updater virus definitions are posted daily. You should download the definitions from the Symantec Security Response Web site and manually install them. To determine whether definitions for this threat are available by the Intelligent Updater, refer to Virus Definitions (Intelligent Updater).

    The latest Intelligent Updater virus definitions can be obtained here: Intelligent Updater virus definitions. For detailed instructions read the document: How to update virus definition files using the Intelligent Updater.

3. To run a full system scan
  1. Start your Symantec antivirus program and make sure that it is configured to scan all the files.
  2. Run a full system scan.
  3. If any files are detected, follow the instructions displayed by your antivirus program.

Important: If you are unable to start your Symantec antivirus product or the product reports that it cannot delete a detected file, you may need to stop the risk from running in order to remove it. To do this, run the scan in Safe mode. For instructions, read the document, How to start the computer in Safe Mode . Once you have restarted in Safe mode, run the scan again.

After the files are deleted, restart the computer in Normal mode and proceed with the next section.

Warning messages may be displayed when the computer is restarted, since the threat may not be fully removed at this point. You can ignore these messages and click OK. These messages will not appear when the computer is restarted after the removal instructions have been fully completed. The messages displayed may be similar to the following:

Title: [FILE PATH]
Message body: Windows cannot find [FILE NAME]. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.

4. To delete the value from the registry
Important: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. For instructions refer to the document: How to make a backup of the Windows registry.
  1. Click Start > Run.
  2. Type regedit
  3. Click OK.

    Note: If the registry editor fails to open the threat may have modified the registry to prevent access to the registry editor. Security Response has developed a tool to resolve this problem. Download and run this tool, and then continue with the removal.

  4. Navigate to the subkey:


  5. In the right pane, delete the value:

    "SadNet3" = "%System%\WinServicces.cab.bak.exe"

  6. Navigate to the subkey:


  7. In the right pane, delete the value:

    "SadNet3" = "(_-oO]xX|-|S|-|a|-|d|-|N|-|e|-|t|-|Xx[Oo-_)!"

  8. Exit the Registry Editor.

Writeup By: Chen Yu